EBS EBS 2600, User Manual

Page: 112 / 184

112 of 184
EN
EBS‑2600 User Man
ual
G2023/04/26_1EN 2023.05.16
2D:MicroPDF417.
When a type of code is selected, an example of the code of the selected type is displayed in
the sheet tab |
|, together with basic information such as:
‑ a set of characters/signs that can be used in the code of the selected type,
‑ code length,
‑ basic description of the code.
3. Enter a content of the code (| | Text ).
The code content must meet the requirements of the selected type of code (characters/signs
out of an applicable set, a required code length). If the entered code content is unsuitable for
the selected type of code, the background of the text box changes its color to red. In such
a case, the code content must be corrected to allow you to create a
Barcode ‑type object .
4. Set the parameters that are specific to a Barcode ‑type object .
Parameter Range of settings
| | Enable resizing
/
The parameter is available for selected bar/matrix codes.
Code scaling.
|
| Signature
/
The parameter is available for selected bar codes.
Add a caption under a 1‑dimensional bar code. The caption is part of the code contents.
|
| Border type
none , bind , box
The parameter is available for selected bar/matrix codes.
Type of code frame; the parameter is available to selected codes:
- none : no frame,
- bind : frame lines on the top and bottom of the code only,
- box : frame lines around the code.
| | Border size
0 to 10
The parameter is available only if | | Border type is different from none .
Thickness of the code frame lines; given as a number of dots.
5. Set the other parameters of the object.
For more details about the parameters that are common to all objects see “5.2.1. Common
Parameters of All Objects” .
6. Press to acknowledge.
The Barcode ‑type object is created in the left top corner of the project.