EBS EBS 2600, User Manual

Page: 154 / 184

154 of 184
EN
EBS‑2600 User Man
ual
G2023/04/26_1EN 2023.05.16
8.3. STORING AND TRANSPORTING
8.3.1. STORING THE PRINTER
The printer shall be stored in a dry place. It is recommended that the printer be stored in its original
package.
The printer must be in a horizontal position in storage.
The procedure for preparing the printer for storing depends on the period over which the printer is
not to be used.
There are two types of preparation for storing:
– for a period of up to 1 week ,
– for a period of over 1 week .
Storing for up to 1 week
To prepare the printer for storing over a period of up to 1 week :
1. Shut the printer down in regular mode.
For more details see “4.2.1. Shutting down in Regular Mode” .
No additional operations are required.
If the printer is used in a heavily polluted environment, it is advisable to apply standard sealing
cover 5a (see Fig. 23 on page 33 ) or optional sealing cover 5b (see Fig. 24 on page 33 ) to
the nozzle plate (in place of the slide).
For more details see “8.3.1.1. Installing a Sealing Cover” .
Do not detach the ink bottle during the storage period.
When the printer that is planned to be stored over up to 1 weeks is taken out of storage, it can be
restarted with no additional operations, but it is advisable to make a few test prints to assess print
quality.
For more details about printer startup see “4.1. Starting the Printer up” .
It may also be necessary to carry out the short purging/venting procedure for the printhead once or
several times.
For more details about printhead purging/venting procedures see “8.1. Purging/Venting
the Printhead” .