EBS EBS 2600, User Manual

Page: 64 / 184

64 of 184
EN
EBS‑2600 User Man
ual
G2023/04/26_1EN 2023.05.16
4. OPERATION
4.1. STARTING THE PRINTER UP
To start the printer up:
1. Connect power plug
7a (see Fig. 2 on page 16 ) to the electrical mains.
2. Press button 1k on the side wall of control unit 1 .
The welcome screen is displayed on the LCD.
3. Wait several dozen seconds.
The main screen is displayed on the LCD.
The printer is started up and ready to print an open project.
The user that is marked with in the user manager is logged in by default.
For more details on how to change the logged in user see “3.3.1. Changing a User” .
Depending on the value of the parameter | | Autostart current project :
‑ Printing of the open project begins immediately after the printer has started up
or
‑ Printing has to be started manually.
4.2. SHUTTING THE PRINTER DOWN
The printer can be shut down regardless of the state it is in, e.g. during printing. In such a case, printing
pauses.
When filled with ink, the printer can remain shut down for a period not longer than 1 week .
4.2.1. SHUTTING DOWN IN REGULAR MODE
To shut down the printer in regular mode:
1. Press
.
The goodbye screen is displayed on the LCD display.
2. Wait a few seconds.
The LCD display is blank.
The printer is shut down.
A sound signal can also be used to signal that the printer is shut down. The sound can be turned
on/off by pressing
| | Printer off sound signal .
3. Pull out power plug 7a (see Fig. 2 on page 16 ) from the electrical mains, if need be.