manualshive.com logo in svg

EBS EBS 2600, User Manual

Share
Download
EBS EBS 2600 User Manual Download Page 158

158 of 184

EN

EBS‑2600 User Man

ual

G2023/04/26_1EN

2023.05.16

5.  Set ink‑system valve 

1d

 at the 

PRINTING

 position.

1d

6.  Start the printer up.

For more details about printer startup see 

“4.1. Starting the Printer up”

.

External transportation

Only 

skilled persons

 can prepare the printer for external transportation. For more information con

-

tact an authorized representative of 

EBS Ink Jet Systeme GmbH

.

Before the printer is transported outside the premises, it is necessary to prepare it as if it was pre

-

pared for storing over a period of more than 1 week.

It is recommended that the printer be transported in its original package.

Permissible mechanical hazards inside the package:

 

–

impacts: 

max. 1 g, max 2 ms

.

For that reason, once it has been transported (

e.g

. it has returned from the service point) it must be 

started up in a way similar to starting up directly after installation.

For more details see 

“2.3. Installing the Printer”

.

Summary of Contents for EBS 2600

























































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands