EBS EBS 2600, User Manual

Page: 45 / 184

45 of 184
EN
EBS‑2600 User Man
ual
G2023/04/26_1EN 2023.05.16
2.4. STARTING THE PRINTER UP FOR THE FIRST TIME
The printer is started up for the first time during installation. Owing to that,
the printer is able to verify the transponder in an ink bottle.
On installing and starting up the printer:
– Set basic parameters such as conveyor belt travel speed, source of trigger signal.
– Make a few test prints.
2.4.1. TEST PRINTS
The procedure is not available to operator ‑type users.
To make the first print:
1. Create/import a text project; it is advisable to create a very simple project which contains
e.g.
one Normal text ‑type text object .
For more details on how to create projects see “5.4. Creating a Project” .
For more details about importing projects see “7.7.1. Exporting/Importing Projects” .
2. Open a project you have created/imported in order to print it.
For more details see “4.3.1. Opening a Project for Printing” .
3. Start printing.
For more details see “4.3.2. Starting Printing” .
4. Move a sheet of paper in front of the photodetector that is selected as the source of the trigger
signal and in front of the face of the printhead to make prints.
5. Assess print quality. If the quality is unsatisfactory, carry out the purging/venting procedure for
the printhead.
For more details see “8.1. Purging/Venting the Printhead” .