EBS EBS 2600, User Manual

Page: 94 / 184

94 of 184
EN
EBS‑2600 User Man
ual
G2023/04/26_1EN 2023.05.16
Example 2
Fig. 57 and Fig. 58 show the configuration in which:
– The printer is not in continuous printing mode (the value of the parameter | | Printout repeti -
tion is different from ) which means that after printing starts ( ) ( ) it awaits the active edge
of the trigger signal ( ) ( ).
– | | Trigger type = Edge , and this means that:
When the beginning of an object is detected, that is when the active edge of the trigger sig -
nal occurs, the printer makes one printout consisting of initial distance B and three reprints P1 .
The printout is made in full (including all reprints) even if the end of the object is detected during
printing, that is the trigger signal becomes inactive ( ).
On finishing printing, the printer awaits the active edge of the trigger signal ( ). When the ac
-
tive edge occurs, the printer makes a successive, single printout consisting of initial distance B
and three reprints Px .
B
p rintout
Trigger type = Edge , Trigger signal mode = Negative edge
Trigger type = Edge , Trigger signal mode = Positive edge
start p rin ti n g
tri
gg
er
Fig. 57.
A
A’ A’ A’
A A
C C
B B
p rintout p rintout
Trigger type = Edge , Trigger signal mode = Negative edge
Trigger type = Edge , Trigger signal mode = Positive edge
start p rin ti n g
tri
gg
er
tri
gg
er
Fig. 58.
A
A’ A’ A’
A A
C C
A’ A’ A’
C C
A A A