EBS EBS 2600, User Manual

Page: 136 / 184

136 of 184
EN
EBS‑2600 User Man
ual
G2023/04/26_1EN 2023.05.16
Parameter Range of values
Dimmed screen brightness
It is dependent on the value of the Normal
screen brightness parameter
Brightness of the screen after the expiration of the idle time given with the Dim screen after
parameter.
When you press any point on the screen, brightness returns to normal.
2. Modify the selected parameter.
3. Press
to acknowledge
The display is configured.
7.3.2. SOUND SIGNAL SETTINGS
Sound signal settings are not available to operator ‑type users.
To modify sound signal settings:
1. Press
.
The sound signal settings involve the following parameters:
Parameter Range of values
| | Enable sound
/
Activate ( ) / deactivate( ) sound signaling in the printer.
When sound signaling in the printer is deactivated ( ), the sound is totally turned off
and detailed signaling settings are not available.
|
| Error sound signal
/
Sound signals generated when an error occurs.
|
| Keyboard audio feedback /
Sound signals generated while button 1k (see Fig. 2 on page 16 ) on the side wall of
the printer's control unit is used.
|
| Touchscreen audio feedback /
Sound signals generated while the touch screen is used.
|
| Message sound signal /
Activate ( ) / deactivate ( ) sound signals in sheet tab | |.
| | Ink accept sound signal /
Sound signals generated after a bottle of ink has been approved.
|
| Printer off sound signal
/
Sound signals generated while the printer shuts down.
|
| Start printing sound signal /
Sound signals generated while printing turns on.
|
| Stop printing sound signal
/
Sound signals generated while printing pauses.