EBS EBS 2600, User Manual

Page: 67 / 184

67 of 184
EN
EBS‑2600 User Man
ual
G2023/04/26_1EN 2023.05.16
4.3.2. STARTING PRINTING
To start printing the open project:
1. Press the
icon in menu bar C on the main screen.
If the parameter | | Edit before printing is started or | | Edit counter before starting
printing is active in any project object, then before printing starts, the request to enter initial
values is displayed. Initial values can be saved as the default values for a given object.
A sound signal can be used to signal that printing has started, too. The sound can be turned on/
off by pressing
| | Start printing sound signal .
The printer enters printing mode in which:
– in continuous printing mode (the project parameter | | Printout repetition = ):
the icon in the status bar on the main screen is replaced with the icon,
printing of a print starts immediately.
– in printing modes different from continuous (the project parameter | | Printout repetition
is different from ):
the icon in the status bar on the main screen is replaced with the icon,
the printer waits until an object is detected by the photodetector selected as the source of
the trigger signal,
when an object is detected by the photodetector, printing starts and the icon is replaced
with the icon.
4.3.3. PAUSING PRINTING
To pause printing:
1. Press the
icon in menu bar C on the main screen.
A sound signal can be used to signal that printing has paused, too. The sound can be turned on/
off by pressing
| | Stop printing sound signal .
The / icon in the status bar on the main screen is replaced with the icon.
The printer finishes printing the project, and then printing pauses.
The printer enters the state of readiness for printing.