manualshive.com logo in svg

EBS EBS 2600, User Manual

Share
Download
EBS EBS 2600 User Manual Download Page 153

153 of 184

EN

EBS‑2600 User Man

ual

G2023/04/26_1EN

2023.05.16

Fig. 63. 

 

1d

1e

15

3.  Assess how dirty the filter gauze is.

If the filter gauze is not dirty, complete air filter 

1e

 can be installed back into the printer. 

Otherwise, a new filter must be installed.

4.  Assess how clean the seat of ink system valve 

1d

 is. If it is soiled with ink, clean the seat using 

sprayed wash‑up and then dry it.

5. 

Use instrument 

15

 to screw air filter 

1e

 into ink-system valve 

1d

. Screw the filter in to the percepti

-

ble limit.
While air filter 

1e

 is being screwed in, it is necessary to hold ink‑system valve 

1d

 with one hand so 

that it does not turn.

6.  Check the position of ink‑system valve 

1d

 and set it at 

PRINTING

, if need be.

7.  Start the printer up.

For more details about printer startup see 

“4.1. Starting the Printer up”

.

Summary of Contents for EBS 2600

























































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands