Eaton IQ 150S, User & Installation Manual

Page: 212 / 234

IM02601006E www.eaton.com C-4
IQ 150S C: DNP Map
These Objects can be read either by requesting a specific Variation available as listed in this
appendix, or by requesting Variation 0. READ requests for Variation 0 of an Object is fulfilled with
the Variation listed in this appendix.
Write (Function 2)
Objects supporting the WRITE function are:
• Internal Indications (Object 80)
Direct Operate (Function 5)
Objects supporting the DIRECT OPERATE function are:
• Control Relay Output Block (Object 12)
Direct Operate - No Acknowledgment (Function 6)
Objects supporting the DIRECT OPERATE - NO ACKNOWLEDGMENT function are:
• Change to MODBUS RTU Protocol
Response (Function 129)
Application responses from IQ 150S meters use the RESPONSE function.
Application Data
Application Data contains information about the Object and Variation, as well as the Qualifier and
Range.
C.5.1: Object and Variation
The following Objects (Obj.) and Variations (Var.) are supported by IQ 150S meters:
• Binary Output Status (Object 10, Variation 2) †
• Control Relay Output Block (Object 12, Variation 1)
• 32-Bit Binary Counter Without Flag (Object 20, Variation 5) †
• 16-Bit Analog Input Without Flag (Object 30, Variation 4) †
• Class 0 Data (Object 60, Variation 1) †