Eaton IQ 150S, User & Installation Manual

Page: 112 / 234

IM02601006E www.eaton.com 5-62
IQ 150S/250S 5: Communication
• To sort the list of locations:
a. Select a sort method (A-Z, Z-A, Newest-Oldest or Oldest-Newest) from the pull-down menu.
b. Click Sort By.
• To connect to a location:
a. Select the location you want to connect to from the List of Locations box.
NOTE:
You may
only connect to one location at a time. To change to a different location, you must disconnect
from the current location by selecting it and clicking Disconnect.
b. Click Connect. When the connection is made, the selected location appears in the Con-
nected To Locations section of the screen.
c. Click Close. The Device Status screen opens, confirming the connection. The computer Sta-
tus bar at the bottom of the screen also confirms the computer’s connection parameters.
NOTE:
If the connection fails, a popup screen alerts you. Check that all cables are secure, that
the RS232 cable is connected to the correct Com Port on the computer, and that the computer is
set to use the same baud rate and protocol as the meter to which the computer is connected.
Disconnecting from an IQ 150S/250S meter
To disconnect from a meter or from a location, do one of the following:
• Click on the Disconnect icon in the Title Bar.
• Select Connection>Disconnect from the Title Bar.
• From the Connection Manager screen, select the location from the Connected to Location field
and click the Disconnect button.