Eaton IQ 150S, User & Installation Manual

Page: 71 / 234

IM02601006E www.eaton.com 5-21
IQ 150S/250S 5: Communication
2. Retype the password.
3. Click Change. The new password is saved and the meter restarts.
NOTE
: If Password Protection has already been enabled for configuration and you attempt to
change the password, you will see the Enter Password screen (shown below) after you click
Change. Enter the old password and click OK to proceed with the password change.
You can enable or disable a Password for Resetting (Reset Max/Min Energy Settings) and Config-
uration (Device Profile) in the Systems Settings screen (see previous page).
NOTE
: If you enable a Password for Resetting, you must also enable it for Configuration.
IMPORTANT!
You must set up a password before enabling Password Protection. Click the
Change button next to Change Password if you have not already set up a password and follow the
above instructions.
When anyone attempts to make a change that is under Password protection, the Enter Password
screen opens. (See the example screen above.) If the correct Password is not entered, the change
does not take place.