Eaton IQ 150S, User & Installation Manual

Page: 120 / 234

IM02601006E www.eaton.com 6-4
IQ 150S/250S 6: Ethernet Configuration
6.3.1: Configuration Requirements
• You may want to consult your Network Administrator before performing these procedures, since
some functions may be restricted to the Network Administrator.
• If you have only one Ethernet adapter (network card), the screen displays only that configura-
tion. You will use this Ethernet adapter to access the IQ 150S/250S meter's Network Module.
You may have to configure the Ethernet adapter in order to use it with the IQ 150S/250S
meter's Network Module, using the instructions in Section 6.4.2.
• If you have multiple Ethernet adapters (network cards) installed on your computer, you must
choose, configure and use the correct one to access the Network Module.
• The Ethernet Adapter must be set up for point-to-point connection in order for it to connect to the
IQ 150S/250S meter's Network module, as follows:
IP Address should be 10.0.0.2
Subnet Mask should be 255.255.255.0
These settings can be made in the Ethernet Adapter. Follow the procedure in Section 6.3.2.