![background image](http://html1.mh-extra.com/html/eaton/iq-150s/iq-150s_user-and-installation-manual_3833744110.webp)
IM02601006E www.eaton.com 5-60
IQ 150S/250S 5: Communication
- Click Add Serial (to add a Serial Port connected device) or Add Net (to add a
Network connected device) in the Devices at Location box. You can add up to
255 devices (Serial Port and/or Network connected) at one location.
NOTES:
•
All devices must have the same connection parameters: Baud, Parity and Flow Con-
trol.
•
Multiple devices slow down polling.
•
If you are connecting to a device through the Power Xpert® Gateway, the protocol
must be Modbus TCP.
f. To edit a device:
- Select the device from the Devices at Location box. (Scroll down to find all
devices.)
- Click Edit. You will see the Connection Manager Location Device Editor screen,
shown below.
- Use this screen to program the device properties for each device at a location.
If the device has a Serial Port device connection, you will see the example
screen on the left; if the device has a Network device connection, you will see
the example screen on the right.
NOTE:
Click the Network or Serial button at the top of the screen to switch
connection screens.
- Enter Device Properties:
Summary of Contents for IQ 150S
