Eaton IQ 150S, User & Installation Manual

Page: 188 / 234

IQ 150S
B: Modbus Map
IM02601006E www.eaton.com MM-6
Description
1
Format Range
6
Units or
Resolution Comments
#
Reg
Modbus Address
Hex Decimal
7533 - 7533 30004 - 30004 PT multiplier & hookup UINT16 bit-mapped mmmmmmmm MMMMhhhh MMMMmmmmmmmm is PT multiplier (1,
10, 100, 1000),
hhhh is hookup enumeration (0 = 3 element
wye[9S], 1 = delta 2 CTs[5S], 3 = 2.5
element wye[6S]) 1
7534 - 7534 30005 - 30005 Averaging Method UINT16 bit-mapped
--iiiiii b----sss
iiiiii = interval (5,15,30,60)
b = 0-block or 1-rolling
sss = # subintervals (1,2,3,4) 1
7535 - 7535 30006 - 30006 Power & Energy Format UINT16 bit-mapped pppp--nn -eee-ddd pppp = power scale (0-unit, 3-kilo, 6-mega,
8-auto)
nn = number of energy digits (5-8 --> 0-3)
eee = energy scale (0-unit, 3-kilo, 6-mega)
ddd = energy digits after decimal point (0-6)
See note 10. 1
7536 - 7536 30007 - 30007 Operating Mode Screen Enables UINT16 bit-mapped
00000000 eeeeeeee
eeeeeeee = op mode screen rows on(1) or
off(0), rows top to bottom are bits low order
to high order 1
7537 - 753D 30008 - 30014 Reserved 7
753E - 753E 30015 - 30015 User Settings Flags UINT16 bit-mapped
---g--nn srp--wf-
g = enable alternate full scale bargraph
current (1=on, 0=off)
nn = number of phases for voltage &
current screens (3=ABC, 2=AB, 1=A,
0=ABC)
s = scroll (1=on, 0=off)
r = password for reset in use (1=on, 0=off)
p = password for configuration in use
(1=on, 0=off)
w = pwr dir (0-view as load, 1-view as
generator)
f = flip power factor sign (1=yes, 0=no) 1
753F - 753F 30016 - 30016 Full Scale Current (for load % bargraph) UINT16 0 to 9999 none If non-zero and user settings bit g is set,
this value replaces CT numerator in the full
scale current calculation. 1
7540 - 7547 30017 - 30024 Meter Designation ASCII 16 char none 8