Eaton IQ 150S User & Installation Manual Download Page 103

Page: 103 / 234

IM02601006E www.eaton.com 5-53

IQ 150S/250S 5: Communication

a. In the Display Angles Increasing and Phasor Rotation boxes, select either Clockwise or

Counter Clockwise.

b. From the pull-down menu at the bottom of the screen, select Vectors, Triangles, or Vectors

and Triangles to change the graphic representation of the data.

2. Click OK to save your selections and return to the Phasors screen.

3. From the Phasors screen:

• Click Copy to save a copy of the screen to the clipboard.

• Click Print to send a copy of the graph to a printer.

• Click Help to view instructions for this screen.

4. Click OK to return to the main screen.

Summary of Contents for IQ 150S











































































































































































































































Search results

Summary of Contents for IQ 150S

Reviews:

Brands by name

Popular brands

Eaton IQ 150S, User & Installation Manual

Search results

Summary of Contents for IQ 150S

Reviews:

Brands by name

Popular brands