![background image](http://html1.mh-extra.com/html/eaton/iq-150s/iq-150s_user-and-installation-manual_3833744056.webp)
IM02601006E www.eaton.com 5-6
IQ 150S/250S 5: Communication
3. Click the
Connect
button on the screen.
NOTE:
You may have to disconnect power, reconnect power and then click
Connect
.
The Device Status screen appears, confirming a connection.
4. Click
OK
.
5. The Eaton Meter Configuration software Main screen appears. Click the
Profile
icon in the Title
Bar.
6. You will see the IQ 150S/250S meter’s Device Profile screen.
NOTE:
The following screens are for the IQ 150S. If you are connected to an IQ 250S, see
Section 5.2.3.
The tabs at the top of the screen allow you to navigate between settings screens (see below).
7. Click the
Communications
tab. You will see the following screen. Use this screen to enter com-
munication settings for the meter's RS485 port (COM 2) Make any necessary changes to set-
tings.
Summary of Contents for IQ 150S
