Eaton IQ 150S, User & Installation Manual

Page: 133 / 234

IM02601006E www.eaton.com 7-3
IQ 150S/250S 7: Using the Submeter
7.2: Using the Front Panel
You can access four modes using the IQ 150S/250S submeter’s front panel buttons:
• Operating mode (Default)
• Reset mode
• Configuration mode
• Information mode - Information mode displays a sequence of screens that show model informa-
tion, such as Frequency, Amps, etc.
Use the
Menu
,
Enter
,
Down
and
Right
buttons to navigate through each mode and its related
screens.
NOTES:
• See Appendix A for the complete display mode Navigation maps.
• The meter can also be configured using software; see Chapter 5 for instructions.
7.2.1: Understanding Startup and Default Displays
Upon Power Up, the meter displays a sequence of screens:
• Lamp Test screen where all LEDs are lit
• Lamp Test screen where all digits are lit
• Firmware screen showing build number
• Error screen (if an error exists)
After startup, if auto-scrolling is enabled, the IQ 150S/250S meter scrolls the parameter readings
on the right side of the front panel. The Kilo or Mega LED lights, showing the scale for the Wh,
VARh and VAh readings. Figure 7.3 shows an example of a Wh reading.