Eaton IQ 150S, User & Installation Manual

Page: 104 / 234

IM02601006E www.eaton.com 5-54
IQ 150S/250S 5: Communication
Poll Limits (IQ 250S)
Click Real-Time Poll>Power Quality and Alarms>Limits. You will see the screen shown below.
This screen shows the current status of any Limits programmed in the Device Profile.
NOTE:
See instructions for configuring Limits, earlier in this chapter.
1. The displayed fields are:
• Limit ID – the identification of the limit
• Label - the item the Limit is set for
• Value – the current reading for this item
• Status/Limit1/Limit2 – whether the current reading is “In” or “Out” for the Above
(Limit 1) and Below (Limit 2) Setpoints
• Limit 1/Setting/Point/Hysteresis – Above: the point above which the reading
goes out of limit (Setpoint) and the point at which it returns to within limit
(Hysteresis)
• Limit 2/Setting/Point/Hysteresis – Below: the point below which the reading goes
out of limit (Setpoint) and the point at which it returns to within limit
(Hysteresis).
2. Click Print to print the screen.
3. Click OK to close the screen.