Eaton IQ 150S, User & Installation Manual

Page: 28 / 234

IM02601006E www.eaton.com 3-2
IQ 150S/250S 3: Mechanical Installation
CAUTIONS!
• Remove the antenna before opening the unit.
• Only use the front cover support if you are able to open the front cover to the extent that you can
fit the front cover support into its base.
DO NOT
rest the front cover support on the inside of the
meter, even for a short time - by doing so, you may damage components on the board assem-
bly. Always insert the front cover support into its base.
3. Find the 4 Installation Slots and insert screws through each slot into the wall or panel.
4. Fasten securely - DO NOT overtighten. Maximum recommended torque is
0.5/0.6 Nm (4.42/5.31 lbF in).
3.2.1:Mounting Diagrams
Figure 3.2: Mounting Plate Dimensions
-/5.4).'0,!4%
v
CM
v
CM
v
CM
v
CM
v
CM