Docomo F-08A, Manual

Page: 59 / 462

57
Voice/Videophone Calls
186/184
Setting caller ID to send/not to send for each call
･
Caller ID is your important information. Carefully consider whether you want to
include caller ID information when making a call.
･
Priority of the method to notify a caller ID → P50
Notifying your caller ID :
186 e
Enter a phone number
e n
or
C
Not notifying your caller ID :
184 e
Enter a phone number
e n
or
C
✔
INFORMATION
･
In case of international call, caller ID may not be notified depending on connecting
phone companies even when "186" is prefixed.
･
When making a call by prefixing "186" or "184", the phone number prefixed with that
number is recorded in the redial list.
Sending touch-tone signals (DTMF)
･
Pause and timed pause are effective only for voice calls.
❖
Sending pause "P"
This function allows you to operate Voice mail at home, to reserve tickets or to
check the balance of a bank account, etc.
1
Enter a phone number
e *
(1 sec. or more)
e
Enter a
number
e n
When pressing
g
after the call is connected, the digits after the pause ("P") are
sent.
❖
Sending timed pause "T"
Timed pause ("T") is used to dial outside line number followed by an extension.
When timed pause ("T") is entered between the phone and extension numbers, the
extension number is dialed with a pause of the predetermined seconds after the
phone number is dialed.
1
Enter a phone number
e #
(1 sec. or more)
e
Enter an extension
number
e n
･
Timed pauses ("T") can be entered in succession.
･
Each timed pause ("T") is followed by an interval of approximately 1 second.
❖
Sending touch-tone signals (DTMF) during a videophone
call
1
During a call,
m0 e
Enter a number
The number you pressed is displayed and the tone signal is transmitted.
c
: Cancel sending
･
While sending camera image or Camera off image, tone signals can be sent
only by pressing numeric keys without pressing
m0
.
･
A still image being sent is canceled.
･
During Chara-den call, actions by pressing numeric keys are not available.
✔
INFORMATION
･
Tone signals may not be received depending on the receiving device.
･
You cannot make a call to another party, putting the current call on hold, by entering a
pause ("P") or timed pause ("T").
Call option
Making a call under set conditions
You can set calling conditions each time you make a call.
･
Priority of the method to notfy a caller ID
→
P50
1
Enter a phone number
e m2 e
Set required items
Chaku-moji : Creating/selecting Chaku-moji
→
P56
Multi-No/Own number : Select a number from which a call is dialed
Call type of Multi Number
→
P322
･
Own number is displayed when 2in1 is in Dual mode or B mode. Select
"Number A" or "Number B" when in Dual mode
→
P322
Call type : Select call type