Docomo F-08A, Manual

Page: 249 / 462

247
Osaifu-Keitai/ToruCa
･
You cannot start the Osaifu-Keitai compatible i-
α
ppli to read/write data in the IC card or
download ToruCa with the power OFF.
･
i-
α
ppli may be started when holding mark over the IC card reader.
･
When scanning mark with the IC card reader, take care not to give a strong shock
to FOMA terminal.
iC transfer service
iC transfer service
*1
is a service that, when replacing Osaifu-Keitai in such cases as
model change or repair, transfers data in an IC card collectively
*2
to a new Osaifu-
Keitai
*3
.
After data in IC card is transferred, Osaifu-Keitai compatible services can be
continuously used only by downloading Osaifu-Keitai compatible i-
α
ppli
*4
. iC
transfer service is available at a sales outlet such as docomo Shop near you.
For details of iC transfer service, refer to "Mobile Phone User's Guide [i-mode]
FOMA version".
*1 Both the source and the destination of the data need to be iC transfer service compatible
FOMA terminal. For using iC transfer service, visit available sales outlet such as docomo
Shop near you.
*2 Some Osaifu-Keitai compatible services are not covered by iC transfer service, so only the
Osaifu-Keitai compatible data saved in IC card covered by iC transfer service can be
transferred.
*3 As this service is "transfer", not "copy", the data saved in IC card does not remain in the
original FOMA terminal. There may be a case that you cannot use iC transfer service, use the
backup service for each Osaifu-Keitai compatible service etc.
*4
i-
α
ppli downloading and settings require packet communication fee.
Starting Osaifu-Keitai compatible i-
α
ppli
･
When first starting or downloading Osaifu-Keitai compatible i-
α
ppli, UIM in use
is registered as the owner (IC owner) of the IC card in the Osaifu-Keitai. After that,
IC card function cannot be used unless the UIM registered as the IC owner is
installed. Note that, when replacing UIM with another one, IC card function
cannot be used unless the IC owner is changed.
→ P247
1
m
[Osaifu-Keitai]
1
The next procedure → P223 Step 3 in "Starting i-
α
ppli"
✔
INFORMATION
･
When Osaifu-Keitai compatible i-
α
ppli is running, Osaifu-Keitai may be unavailable by
placing mark over the IC card reader.
･
Active Osaifu-Keitai compatible i-
α
ppli may be interrupted in the following cases. In
that case, the data being read/written may be discarded.
- When a call is received
- When Lock on close/Lock when immobile is activated
- When the date specified in the watching/recording reservation of 1Seg, countdown timer, alarm
clock or schedule comes
- When the function is switched over to another function
･
When you are out of service area or the saved data cannot be used, some Osaifu-Keitai
compatible i-
α
ppli may not start or not operate correctly.
･
Press
m
[Osaifu-Keitai]
2
to activate DCMX クレジットアプリ (DCMX credit appli).
Check IC owner
Checking owner information of IC card
You can check if the UIM in use is registered as the owner (IC owner) of the IC card
in the Osaifu-Keitai.
1
m
[Osaifu-Keitai]
6
･
If not registered, install a UIM registered as IC owner, or select "How to reset
IC owner" and change IC owner.
→ P248 Step 2 in "Changing IC owner"
❖
Changing IC owner
To change IC owner, IC owner requires to be reset. If it is reset, iD 設定アプリ (iD
appli) is restored to the default and Osaifu-Keitai compatible i-
α
ppli other than iD 設
定アプリ is deleted. Note that, for Osaifu-Keitai compatible i-
α
ppli that the data in IC
card is saved, the data in IC card needs to be deleted by activating or redownloading
i-
α
ppli before being reset. After reset, if starting or downloading Osaifu-Keitai
compatible i-
α
ppli, it is registered as IC owner.
1
m
[Osaifu-Keitai]
7