Docomo F-08A, Manual

Page: 303 / 462

301
Convenient Functions
◆
Checking call cost
1
m
[Settings & NW services]
74121
･
If there is no last call cost information, " YEN" appears.
Last call cost: Voice : Charge for the previous voice call
Last call cost: VP : Charge for the previous videophone call
Last call cost: Data : Charge for the previous data session
Total calls cost : The total cost of voice/videophone calls or data
communication
Reset: day & time : Last date and time the total duration was reset
Resetting total calls cost : On the call cost check screen,
C e
Enter the PIN2
code
e
"Yes"
❖
Automatically resetting Total calls cost <Reset call cost>
You can set whether to automatically reset Total calls cost at 0:00 on the first day of
every month.
1
m
[Settings & NW services]
74124 e
Authenticate
e 1
or
2 e
Enter PIN2 code
✔
INFORMATION
･
The duration of received calls or that for establishing call with the other party is not
counted.
･
Transmission charge for Chaku-moji messages is not counted.
･
For i-mode and packet communications, the communication duration or costs are not
counted. For the procedure for confirming i-mode fees, refer to "Mobile Phone User's
Guide [i-mode] FOMA version".
･
The international call fee for using WORLD CALL is counted. It is not counted for using
other international call service.
･
When FOMA terminal is turned OFF, the previous call cost appears as " YEN".
･
When last or total duration for the voice/videophone call or data communication has
exceeded 9,999 hours, 59 minutes and 59 seconds, counting restarts from 0 second.
･
If voice and videophone call is switched during the call, the last call cost shows the total
charge for each of voice and videophone calls. No call cost is charged while switching.
･
The total of Number A and Number B appears for the total call duration and total calls
cost with 2in1 subscribed.
<When Reset call cost is "ON">
･
The call cost is reset after the terminal is turned ON or ending the call if the power is
OFF or a call is being made at 0:00 on the first day of the month.
･
The call cost is immediately reset when date and time in the next or subsequent month
are set in Date & time.
･
PIN2 code is required when turning the power ON or authentication is required when
performing Date & time.
◆ Notifying call cost upper limit <Call cost limit>
When Total calls cost has exceeded the set limit, it is notified with an alarm, icon
display, etc.
1
m
[Settings & NW services]
74122 e
Authenticate
e
Set required items
e C
Alert : Set this option to "ON" to be notified when the limit is exceeded.
Limit : Enter the upper limit cost in the range of 10 yen-100,000 yen omitting the
one's place.
Alert method : Set to use both an alarm and icon or only an icon for notification.
Alert sound : Select a sound to be notified.
Alert time : Set the period of time to sound the alarm in the range of 1-60
seconds.
❖
When the call cost has exceeded the limit
･
During a call or communication, appears at the top of the display.
･
When the stand-by display reappears after completion of a call or communication
with Alert method set to "Sound + icon display", an alarm sounds and "Call cost
reached limit." appears on the display. However, an alarm does not sound if you
make a call or communication with FOMA terminal closed or if you end a call by
closing FOMA terminal.
･
The alarm operates according to Call alert volume of Adjust volume.
❖
Hiding call cost icon <Hide call cost icon>
1
m
[Settings & NW services]
74123 e
Authenticate
e
"Yes"