Docomo F-08A, Manual

Page: 42 / 462

Before Using the Handset
40
■ Scrolling a browser screen
You can scroll a browser screen up, down, to the right, left, or obliquely by tilting
FOMA terminal while holding down
S
or
D
. The more you tilt the terminal, the
faster the scrolling speed becomes. For example, tilt the terminal forward to scroll
down and backward to scroll up.
･
The pointer does not move even after the screen scrolls.
✔
INFORMATION
･
While walking or in the place with much vibration, scrolling a browser screen by titling
FOMA terminal may not work correctly. Also, do not walk while watching a screen
because it is dangerous.
◆ Enabling Motion sensor <Motion sensor>
1
m
[Settings & NW services]
76 e
Set required items
e C
Motion sensor : Set whether to enable Motion sensor.
Auto rotation : When "OFF" is set, the auto rotation for all the functions is
disabled. When "ON" is set, you can set whether to enable each function.
Press
m
to view the description of auto rotation of the function at the cursor
position.
Using UIM (FOMA card)
UIM (FOMA card) is a card for storing user information such as phone numbers.
･
If UIM is installed incorrectly or if there is a problem with UIM, you cannot make/
receive a call or send/receive a mail.
･
For details on handling UIM, refer to the UIM manual.
◆
Installing/Removing
･
After turning the power OFF, close FOMA terminal and hold it with your hand.
･
Take care not to touch or scratch the IC part.
･
Attaching/Removing back cover and battery pack
→
P42
■ Installing
a
Pull the tab and pull out the tray until it clicks.
b
Put UIM to the tray with the IC side down and beveled corner fitted to the tray,
and push the tray until it stops.
■ Removing
a
Perform
a
of installing operation.
b
Take out UIM.
✔
INFORMATION
･
Note that forcible installing or removing UIM, or installing battery pack with the tray
inserted at a slant may break UIM or the tray.
･
If the tray is removed, press it straight along the guide rail inside the UIM slot with UIM
left detached.
◆ Security code
Two security codes, "PIN code" and "PIN2 code", are set for UIM.
･
You can change the security codes yourself. → P100
◆ UIM operation restriction
FOMA terminal is provided with UIM operation restriction for protecting your data/
files or data/files copyrighted by a third party.
･
When files or data are downloaded from websites or data attached to mails are
obtained to your FOMA terminal with UIM equipped, UIM operation restriction is
automatically set to these data or files.
Tab
Tray
Corner cut
IC
UIM