Docomo F-08A, Manual

Page: 50 / 462

Before Using the Handset
48
◆
Operations to perform after turning the power ON at the
first time
When turning the power ON for the first time, operate in the order of "
拡大メニュー
の設定
(enlarged menu setting)"
→
"Initial setting". The settings made can be
changed later.
･
When initialization is finished, a confirmation screen of software update function
appears. Press
g
to display the stand-by screen.
❖
Enlarged menu setting
1
"Yes" or "No" on the confirmation screen
･
When selecting "Yes", " 拡大メニュー (enlarged menu)" of Kisekae Tool is set.
If you cancel the confirmation screen by pressing
c
or
f
, the
confirmation screen reappears when the power is turned ON the next time.
❖
Default setting
･
Always set Password. When
C
or
c
,
f
is pressed before setting terminal
security code, a confirmation screen for exiting appears. If you exit by selecting
"Yes", the initial setting screen reappears when the power is turned on next time.
･
You can also display the initial setting screen by pressing
m
[Settings & NW
services]
748
on the stand-by display.
1
Set required items on Initial setting screen
e C
Date & time : Set the date and time. → P49
Password : Change the terminal security code after performing authentication.
→ P99
Keypad sound : Set the confirmation sound when a key is pressed. → P81
Text size : Set size of characters for phonebook, mail, etc. → P95
❖
Checking Welcome mail
"Welcome ドコモ動画 (DOCOMO moving picture)", " 緊急速報「エリアメール」
のご案内 (Early warning "Area Mail" information)", " オススメ BEST
(Recommendation)" mail messages are saved by default. appears on the
stand-by display, and the light (blink) indicates that there is unread mail.
1
g e g
The next procedures
→
P133 Step 2 and the following steps in "Displaying mail
in inbox/outbox/unsent mailbox"
✔
INFORMATION
･
When UIM is replaced, authentication is required after turning ON FOMA terminal.
When authentication is succeeded, the stand-by display appears. If an incorrect
terminal security code is entered 5 times consecutively, the power is turned off (the
power can be turned on again).
･
If no operation is performed with something displayed on the screen, the display light
is turned off automatically according to the settings in Light time-out or Power saving
mode. It also applies while making a call. The display light turns on again if there is any
operation or incoming call.
Select language
Changing screen display to English
1
m
[ 設定 /NW サービス (Settings & NW services)]
263 e 1
or
2
✔
INFORMATION
･
This setting is also saved to UIM.
･
Even if setting to "English", the displayed menu is not switched to English in some
Kisekae Tool. Note that, when Kisekae Tool in "Preinstalled" folder is set, a menu
dedicated to "English" is displayed.
･
Even if changing this setting, the title of Shortcut icon is not changed from the language
set when the shortcut icon was pasted.