Docomo F-08A, Manual

Page: 197 / 462

195
1Seg
■ Screen appearing when reading storage area
When using information saved in the storage area while watching a program, "Use
saved information? It may include information used by the same affiliate." appears.
Select "Yes" to display no confirmation screens subsequently when reading saved
information while watching the same program. Select "Yes (Always)" to display no
confirmation screens subsequently also for different programs.
Before using 1Seg
■ 1Seg watching procedures
a
Create and set the channel list corresponding to the area where you watch
1Seg.
→ P195
b
Start 1Seg. → P196
■ 1Seg antenna
The terminal has a built-in 1Seg antenna, and an entire body of the terminal can
work as an antenna. To receive signals, minimize the covered part of FOMA
terminal when holding it with your hands to watch 1Seg in better conditions.
However, when FOMA terminal is closed, an antenna shown in the following
illustration is used for reception. Do not cover it with your hands etc. while
recording etc.
✔
INFORMATION
･
Note that DOCOMO assumes no responsibility whatsoever for any loss or modification
of saved contents resulting from malfunction, repair or other handling of FOMA
terminal.
When changing the model of or repairing FOMA terminal, information (still images
recorded by 1Seg, TVlink, information saved in the storage area, etc.) saved in the
terminal cannot be transferred.
･
Watching 1Seg long time while charging may reduce the battery pack lifetime.
Setting channels
To watch 1Seg, you need to create a channel list of broadcasting stations and
saved channels, and set it according to the area. Up to 10 items can be saved.
◆
Creating Channel list
Channel list can be created in either of the following ways.
Use preset : Broadcasting stations and channels that can be received are saved in
advance by area. Select from the area list.
Auto setting : Broadcasting stations and channels that can be received in your
current location, are automatically searched and set. Perform this within the
terrestrial digital TV broadcasting service.
･
Channels in a preset may not be available depending on the place you watch. In
that case, use Auto setting.
1
m
[LifeKit]
97 e C
･
A confirmation screen for creating a channel list appears if there is none.
2
Select a method to create
Setting from a preset : "Use preset"
e
Select an area
e
Select a
prefecture
e
Select a local municipality
･
For some areas, selecting prefecture or local municipality may be omitted.
Creating by automatic search : "Auto setting"
e
"Yes"
e
Select an area
Auto setting starts and, upon completion, a confirmation screen appears.
･
When "No" is selected on the confirmation screen to select an area, an auto-
scanning channel setting screen remains displayed. At this time, channel list
is named after the date and time of creating.
･
When an area is selected, channels of the selected area are searched first.
･
To interrupt Auto setting, press
g
and select "Yes".
3
"Yes"
Antenna that is used when FOMA terminal is closed