Docomo F-08A, Manual

Page: 290 / 462

288
Convenient Functions
b
Enter the title (up to 36 characters)
e C
･
To reset to the original title, select "Restore original".
Deleting :
m1 e
Move the cursor to a search service
e m2 e
"Yes"
Switching the order :
m1 e
Move the cursor to a search
service
e m e 3
or
4
3
"Save"
e
Enter the title (up to 36 characters)
e C
･
When exceeding the savable number, a confirmation screen for overwriting
appears.
Auto power ON/OFF
Turning power ON/OFF automatically
1
m
[Settings & NW services]
71 e 2
or
3 e
Set
required items
e C
✔
INFORMATION
･
Even when Auto power OFF is set to "ON", the power is not turned OFF while using
other functions.
･
In addition to turning FOMA terminal OFF, keep Auto power ON set to "OFF" in areas
where use of a mobile phone is prohibited, such as in airplanes, medical facilities or
hospitals.
Countdown timer
Setting the timer with a simple operation
On the stand-by display, you can enter and set the time (minutes) to elapse before
the timer sounds.
1
Enter time (1-60 minutes)
e u
The countdown starts.
･
When FOMA terminal is closed during countdown, remaining time before the
timer sound is displayed on the sub-display.
･
When
c
or
f
is pressed during the countdown, a screen for confirming
the end appears.
❖
When the specified time has elapsed
"Timer Countdown ended" appears on the display, and the timer sounds at Alarm
clock sound of Adjust volume. Actions are taken according to the settings to Alarm
Clock in Vibrate alert/effect or Call in Light alert. When FOMA terminal is closed,
and "Countdown ended" appear on the sub-display.
･
Press
f
to stop the timer.
･
To stop timer, perform no operations for approximately 1 minute, press keys
except
f
,
D
and
T
, or double-tap (
→
P39).
✔
INFORMATION
･
When the specified time comes during a call, a warning sound is emitted and a timer
screen appears.
･
When the specified time comes during a fake call, the timer does not sound and the
vibrator operates.
･
When the specified time comes while making/receiving a call, calling, disconnecting,
making/receiving 64K data communication, in data transfer mode, while using infrared
remote control or while high-pitched alarm is sounding, the timer is activated after
termination of current operations.
Alarm clock
Ringing alarm clock at specified time
･
You can set 1Seg to start after Alarm clock sounds.
･
Up to 9 items can be set.
1
u
(1 sec. or more)
e 1
-
7
Setting/Canceling : Move the cursor to a set alarm clock
e m
･
appears at the left of the time when Alarm clock is set.
2
Set required items
Time : Enter the time to sound an alarm clock.
Repeat : When setting Repeat, appears at the right of Snz in the alarm clock
list.
･
When "Day of week" is selected, select "Day/Week", select a day of the week
and press
C
.