Docomo F-08A, Manual

Page: 321 / 462

319
Network Services
Call Waiting
When there is another incoming voice call during a voice call, this service notifies
you with the call waiting ring tone. This allows you to place your current voice call
on hold and then answer the other voice call. You can also make a call to another
party, putting the current call on hold.
･
To use Call Waiting, set Arrival call act to "Answer" in advance. Otherwise, the call
waiting does not answer another incoming voice call during a call, even if it is
activated.
･
To answer the other incoming voice call during a voice call, perform the following
operations.
n
: Put the current call on hold and answers the incoming call.
f
: The current call is disconnected and the calling screen of the incoming call
appears. Press
n
and answer the call.
･
During Call Waiting, you can switch the party to talk to by pressing
I
.
･
When making a voice call to another party during a current voice call, press
m
and select "Dial up".
･
Even for an incoming call that Call Waiting does not start, you hear the call
waiting ring tone. In this case, a message indicating that you can answer the call
by disconnecting the current call appears.
1
m
[Settings & NW services]
821 e
Operate by selecting
a menu item
[Activate] :
1 e
"Yes"
[Deactivate] :
2 e
"Yes"
[Check setting] :
3 e
"Yes"
Call Forwarding Service
Call Forwarding Service forwards voice calls and videophone calls to the phone of
your home or office when there is an incoming voice/videophone call while FOMA
terminal is in a location where radio waves are hard to reach or is powered OFF or
you do not answer the call within the specified ring time.
･
To make Call Forwarding Service override Record message when both are
activated, set ring time for Call Forwarding Service shorter than response time for
Record message.
･
If an incoming voice or videophone call is not answered with Call forwarding
activated, it is recorded as a missed call and
(the number indicates the
number of missed calls) appears on the stand-by display.
･
When using 2in1, activation, deactivation, and check setting of Call Forwarding
Service can be set for Number A and B respectively. You can configure settings
for Number A in A mode, and for Number B in B mode, and select one of them in
Dual mode. Other items are common for both.
❖
Basic flow of Call Forwarding Service
Step 1 : Activate Call Forwarding Service.
Step 2 : Register the phone number of forwarding destination.
Step 3 : Call comes in to FOMA terminal.
Step 4 : Unanswered calls are forwarded to the previously specified destination.
1
m
[Settings & NW services]
822 e
Operate by selecting
a menu item
[Activate] :
1 e
"Yes"
e
"Yes"
e
Enter a phone number
e C e
"Yes"
e
Enter
ring time
･
When ring time is set to "0 Sec", incoming calls are not recorded in Received
calls.
･
For B Number, only Activate can be set.
･
You can select a phone number from phonebook with
m
, from Received calls
with
I
, and from Redial with
a
.
[Deactivate] :
2 e
"Yes"
[Register forwarding number] :
3 e
Enter a phone number
e C e 1
or
2 e
"Yes"
･
You can set Register The Forwarding Number when the service is active, and
set Register The Forwarding Number as well as Activate when the service is
inactive.
･
For B Number, only Register The Forwarding Number can be set.