Docomo F-08A, Manual

Page: 227 / 462

225
i-
α
ppli/i-Widget
◆
Displaying Security error history
When i-
α
ppli ended with an error because i-
α
ppli cannot use the saved data, the
name of the i-
α
ppli, date and time, and cause of security error are recorded.
･
Up to 20 items can be recorded. When exceeding the limit, record is overwritten
chronologically.
1
m
[i-
α
ppli]
43
･
To delete histories, press
C
and select "Yes".
◆ Displaying i-
α
ppli description <Software description>
1
I
(1 sec. or more)
e
Select a folder
e
Move the cursor to i-
α
ppli
e C
･
Displayed items differ by i-
α
ppli.
･
To check the site certificate of the i-
α
ppli downloaded from SSL/TLS page,
press
C
on Software description screen.
◆ Setting operating condition of i-
α
ppli <Software
settings>
･
You cannot select the item not supported by the i-
α
ppli.
･
When 2in1 is in Dual mode or B mode, "Set i-
α
ppli display" and "Set NW
transmission during i-
α
ppli display" cannot be selected.
1
I
(1 sec. or more)
e
Select a folder
e
Move the cursor to i-
α
ppli
e m6 e
Set required items
e C
Set i-
α
ppli display : Set if you set i-
α
ppli to stand-by display. Only one i-
α
ppli
can be set.
Set NW transmission during i-
α
ppli display : Set if you allow automatic
communication while the i-
α
ppli stand-by display is running.
Set NW transmission : Set if you allow automatic communication while the i-
α
ppli is running.
Use icons : Set if you allow i-
α
ppli to use icons for mail, MessageR/F, battery,
Silent mode and signal level.
Start from browser : Set if you allow starting the i-
α
ppli from site (i-
α
ppli To).
Start from ToruCa : Set if you allow starting the i-
α
ppli from ToruCa (i-
α
ppli To).
Start from mailer : Set if you allow starting the i-
α
ppli from mail (i-
α
ppli To).
Start from Location Service menu : Set if you allow starting the i-
α
ppli from link
item of location information in site, MessageR/F or ToruCa (i-
α
ppli To).
Start from external : Set if you allow starting the i-
α
ppli from external device (i-
α
ppli To).
Start from data broadcasting site : Set if you permit activation from 1Seg data
broadcasting site (i-
α
ppli To).
Allow ring tone / image changes by software
*
: Set if you allow i-
α
ppli to
change settings such as ring tone and images for the stand-by display.
Confirm all changes
*
: Set if you display a confirmation screen each time the
settings of ring alert or images are changed.
Allow access to phone book / call records by software
*
: Set if you allow i-
α
ppli
to refer to phonebook, redial or received call logs automatically. This setting
also applies to ToruCa saved in FOMA terminal.
Program guide key setting
*
: Set if you set i-
α
ppli in program guide i-
α
ppli
activated from 1Seg. Only one i-
α
ppli can be set.
Map setting
*
: Set if you set i-
α
ppli to be the i-
α
ppli used for Show map. Only
one i-
α
ppli can be set.
･
This setting also applies to Select map. → P242
i-
α
ppli call setting
*
: Set if you activate i-
α
ppli from i-
α
ppli call.
* Available only for i-
α
ppli DX.
✔
INFORMATION
･
When setting Set i-
α
ppli display to "Yes", a confirmation screen for setting appears
(except when i-
α
ppli is already set to the stand-by display). When it is set, Show ticker
of i-Channel setting or Information display is set to "No/Not display" if it was set to "Yes/
Display". When Set i-
α
ppli display is set to "No", Show ticker of i-Channel setting or
Information display is set to "Yes/Display".
･
If you set "No" for Set NW transmission, i-
α
ppli may not be started and timely
information such as stock prices or weather information may not be provided by i-
α
ppli.
･
If you set "Yes" for Use icons, since icons for unread messages, unread MessageR/F,
remaining battery level, Silent mode, and antenna icon may be sent to IPs (Information
Providers) through the Internet, it may give the information to a third party. Some i-
α
ppli requiring icons may not operate when "No" is set.
･
When "No" is selected in Program guide key setting, a cancellation confirmation screen
appears.
･
When "Yes" is selected in Map setting, a message appears indicating that selected
location information may not be displayed.
･
Some i-
α
ppli are unavailable even when i-
α
ppli call setting is set to "Yes".