Docomo F-08A, Manual

Page: 324 / 462

322
Network Services
Remote control
Setting remote control
You can access services such as Voice Mail service and Call Forwarding Service
from touch-tone land-line phones, DOCOMO mobile phones, payphones, etc.
･
When using Voice Mail or Call Forwarding Service etc. overseas, Remote control
must be activated in advance.
1
m
[Settings & NW services]
892 e
Operate by selecting
a menu item
[Activate] :
1 e
"Yes"
[Deactivate] :
2 e
"Yes"
[Check setting] :
3 e
"Yes"
Multi Number
In addition to Basic Number, you can add and use up to 2 more numbers as phone
numbers of FOMA terminal : Additional No.1 and No.2.
･
Removing or replacing UIM may cause Multi Number settings (name, phone
number, etc.) saved in FOMA terminal to be deleted. In this case, save the settings
again.
･
The name of Default phone number or Additional phone number is displayed on
the incoming/outgoing call screen, Redial or Received calls screen.
･
When making a call from Redial/Received calls, a name of Multi Number used for
the previous call is displayed and that number is used.
1
m
[Settings & NW services]
897 e
Operate by selecting
a menu item
[Set Multi Number] :
1 e 1
-
3 e
"Yes"
[Check setting] :
2 e
"Yes"
[Number Setting] :
3 e
Set required items
e C
･
Enter the name and phone number of Additional Number1 or Additional
Number2.
･
The name and phone number set for Basic Number is the one from User
information. When User information is not set, " 基本契約番号 (basic number)"
and a phone number of your subscription are displayed.
･
When Multi number call is "Enable", you can select a Multi number to make
a call from the submenu for outgoing calls.
[Incoming calls melody setting] :
4 e 1
or
2 e
Set required
items
e C
･
Set Individual setting to "ON", and set a ring alert and incoming call image for
each additional number. Setting operations are the same as the one for Call
alert.
◆ Selecting a phone number and making a call
･
When Multi number call of Number Settings is "Disable", Multi number cannot be
selected.
1
Enter a phone number
e m4 e 1
-
3 e m
or
I
･
When Caller ID from Call option is set to "Unspecified", the Caller ID from Set
multi number is applied.
2in1
This service allows you to use 2 phone numbers/mail addresses for 1 mobile
phone; you can use FOMA terminal as if you have two different mobile phones by
using the specific mode function.
･
For details of 2in1, refer to "Mobile Phone User's Guide [2in1]".
･
With 2in1 ON, if replacing UIM (2in1 subscriber → 2in1 subscriber), set 2in1 to OFF
then set it to ON again to obtain the correct Number B, or obtain Number B from
User information.
→ P299
Also, if replacing UIM (2in1 subscriber → 2in1 non-subscriber), set 2in1 to OFF so
that the user information is updated correctly.
■ Modes for 2in1
･
Operation of each mode for 2in1 → P324
A mode : Allow to use your phone number (Number A) to make calls, send/receive
i-mode mails (Address A) and view the related data.
B mode : Allow to use 2in1 phone number (Number B) to make calls, send/receive
i-mode mails (Address B) and view the related data.
Dual mode : Allow to use functions of both A and B.