Docomo F-08A, Manual

Page: 191 / 462

189
Camera
･
Skew correction function cannot completely correct camera skew. The effect depends
on the object and/or shooting states. Some still images may be more natural if not
adjusted.
･
It is recommended to use auto-focus when using skew correction.
◆ Shooting with frame added
･
Frames are available for the following sizes.
Still image shooting : Stand-by (480
×
854) or smaller
Moving picture shooting : QCIF (176
×
144)
1
On the still image shooting screen,
m73
or on the moving
picture shooting screen,
m3
2
1 e
Select a frame
Canceling :
2
･
You can also cancel by pressing
4
for 1 second or more on the shooting
screen.
Rotating :
3
Updating :
4
◆
Switching full-screen and standard screen modes
In full-screen mode, icons and the guide area are not displayed.
1
On the still image shooting screen,
*
◆
Switching still image shooting and moving picture
shooting
･
Switching is not available in continuous panorama shooting.
1
On the shooting screen,
I
(1 sec. or more)
･
When key assign ( → P186) is set to "Movie camera"/"Still camera", press
I
to switch shooting modes.
◆
Setting Auto timer
You can set so that the shutter clicks after specified time elapses.
･
When set, countdown starts while shooting, and the light blinks in green
synchronized with the countdown sound. The countdown sound and blinking of
the light go faster when the remaining time is reduced to a few seconds.
･
With auto focus function, countdown starts after auto focus is activated. When
using manual auto focus, focus is adjusted and countdown starts regardless of
the setting of full auto focus.
･
To cancel countdown, press
C
.
1
On the still image shooting screen,
m5 e 1
-
5
✔
INFORMATION
･
Countdown is canceled in the following cases.
- When a call is received
- When the date and time specified in countdown timer, alarm clock or schedule come
- When FOMA terminal is closed
･
Auto timer is not available for Continuous (Manual), 4 frames (Manual) and Panorama.
◆ Setting Smile-finder or Face detection
You can use the face detection function to detect people's faces and to measure
smile rates. Also, use of Smile-finder allows you to shoot a still image when a smile
rate of a subject reaches the set value.
･
The shooting procedure when using Smile-finder → P181 Step 3 in "Shooting still
images with Camera"
･
Face detection frame and smile rates are displayed on the detected faces and the
brightness of face is adjusted automatically.
･
Up to 10 face detection frames are displayed. The frame with the highest
detection rate is displayed in green. Other frames are displayed in white.
･
When a face is not detected, a white frame is displayed at the center of the screen.
･
Switching is available only when Scene mode/effect is set to "Auto", "Standard",
"Portrait", "Landscape", "Skin tone enhance", "Eye enhance-Lo/-Hi" or "Eye+Skin
enhance-Lo/-Hi".
･
This cannot be switched when shooting with in-camera or setting Skew
correction to "OFF".
･
When Auto timer is set, setting other than "Smile finder OFF" or "Face detection
OFF" is unavailable.
1
On the still image shooting screen,
m3 e 1
-
8
Smile finder OFF : Only Face detection operates. Shoot using Auto focus.
Group(70%, 50%, 30% SmileRate) : Shoot when SmileRate of all people for
detecting reaches the set rate.
Single (70%, 50%, 30% SmileRate) : Shoot when SmileRate of the person who
is in the highest level of detection reaches the set rate.