Docomo F-08A, Manual

Page: 302 / 462

300
Convenient Functions
Voice memo/Movie memo
Recording voice/image
You can record voice or images while talking over a call or in stand-by mode.
･
Up to 4 voice memo while talking or voice memo in stand-by can be recorded in
total, with up to 30 seconds for each memo.
･
Moving picture memos up to 30 seconds each can be recorded.
･
Some guidances cannot be recorded.
･
The recording of the voice memo while talking or moving picture memo may be
distorted or the image may be blurred if the radio waves are poor.
･
Playing of voice memo → P65
･
Playing moving picture memo → P259
◆ Recording the other party's voice/image during a call
1
During a call,
S
(1 sec. or more)
Recording starts. When the remaining time is about 5 seconds, two short beeps
indicating the end of recording sound. A long beep sounds at the end of
recording.
･
While recording, elapsed recording time appears at the bottom of the screen.
･
During moving picture memo recording, the image is sent to the other party
according to the settings of Movie memo image in Image setting (videophone
image).
･
During moving picture memo recording, pressing
g
switches display
between lapse of the recording time and call duration.
･
To stop in the middle of recording, press
S
for 1 second or more.
◆ Recording your own voice during stand-by
･
Operate with FOMA terminal opened.
1
S
(1 sec. or more)
e 3
After about 3 seconds, a long beep sounds and recording starts. When the
remaining time becomes about 5 seconds, 2 short beeps noticing the end of
recording sound. A long beep sounds at the end of recording.
･
While recording, elapsed recording time appears in the bottom of the screen.
･
Press any of
g
,
c
or
f
to stop in the middle of recording.
Call duration/Call cost
Checking call duration/charge
Last and total call durations and costs for voice and videophone calls can be
checked.
･
The call durations are displayed for voice calls, videophone calls and 64K data
communication, by the counting both outgoing and incoming calls.
･
Call costs are only counted for outgoing calls. However "0 YEN" or " YEN"
appears when a call is made to toll free numbers such as Free-dial or to Directory
assistance (104).
･
Because the call costs are stored on UIM, the stored total calls cost appears
(totaling from December, 2004) when UIM is replaced.
･
The call durations and costs displayed are approximate values and may be
different from the actual durations and costs.
･
The call costs displayed do not include consumption tax.
◆ Checking call duration
1
m
[Settings & NW services]
7411
Last call : Duration of last incoming/outgoing voice call, videophone or data
session
Total voice calls : The total duration of voice calls made
Total videophone calls : The total duration of videophone calls made
Total data sessions : The total duration of data communication established
Reset:day&time(Voice) : Last date and time the total duration of voice calls was
reset
Reset:day&time(VP) : Last date and time the total duration of videophone calls
was reset
Reset:day&time(Data) : Last date and time the total duration of data
communications was reset
Resetting total calls : On the call duration check screen,
C e
Authenticate
e 1
-
4 e
"Yes"