Docomo F-08A, Manual

Page: 83 / 462

81
Sound/Screen/Light Settings
Vibrate alert/effect
Informing you of incoming calls and alarms by
vibration
･
The vibrator for receiving 64K data communication operates according to the
setting of incoming voice call.
･
This setting also applies to alert settings of voice/videophone calls, mail and
MessageR/F, Vibrate effect of i-
α
ppli settings.
･
If FOMA terminal is on the desk etc. when the vibrator operates, it may fall off
because of the vibration.
<Example> Setting vibrator for incoming voice and videophone calls
1
m
[Settings & NW services]
13
2
1 e 1
or
2
Setting vibrator when receiving mail and MessageR/F :
2 e 1
-
3
Setting vibrator when receiving i-concier :
3
Setting vibrator when an alarm clock or schedule reminder sounds :
4 e 1
or
2
Setting vibrator when using i-
α
ppli :
5 e 1
or
2
･
Omit Step 3.
3
1
-
5
･
If you move the cursor to "Pattern A", "Pattern B" or "Pattern C", it vibrates in
the pattern at the cursor position.
･
When setting to "Sync melody", the vibrator operates along with the melody
set for ring alert etc. Note that some melodies are not synchronized.
･
If the vibrator for incoming calls is set, appears on the stand-by display if
the Call alert volume is more then "Level 1". appears when Call alert
volume is set to "Silent".
❖
Vibrate alert priority
When setting vibrator for receiving in multiple functions, it operates in order of the
following priority.
a
Alert by contact of FOMA terminal phonebook
b
Alert/image by group of FOMA terminal phonebook
c
Vibrate alert/effect/Call alert/Videophone alert/Mail alert
✔
INFORMATION
･
It does not vibrate when receiving a call/mail during a call.
･
Even with "OFF", the vibrator may operate when Flash graphics operate.
Melody Call
Changing ring tone
This is a service to let the caller to FOMA terminal hear melody instead of ring alert.
･
A communication fee is free for connecting to the setting site. Note that packet
communication fees are charged for connecting to IP site, i-mode menu site or
Free Melody Corner.
･
Melody Call is valid only when a voice call is received.
1
m
[Settings & NW services]
118 e
"Yes"
The melody call site is connected.
･
For details, refer to "Mobile Phone User's Guide [Network Services]".
Setting System sound
◆
Keypad sound
･
Even if setting a sound, no sound is made while i-
α
ppli is activated.
･
When setting to "OFF", the confirmation sound is not emitted when reading a
code.
･
When the sound of Battery level and End alert of Data exchange settings are set
to "ON", sounds are emitted according to these settings.
1
m
[Settings & NW services]
1151 e 1
-
5
◆ Open/Close sound
Set a sound to be emitted when opening/closing FOMA terminal.
1
m
[Settings & NW services]
1152 e 1
-
4