Docomo F-08A, Manual, Page: 193 / 462

191
Camera
■ JAN code
JAN code is a bar code representing a number with vertical lines (bars) of different
widths. The bar code of 8 digits (JAN8) or 13 (JAN13) can be read.
■ QR code
QR code is the 2-dimensional codes representing a string of alphanumeric, kanji,
hiragana, katakana, pictograms or data such as melody and image with the vertical
and horizontal patterns.
■ NW7 code
A bar code representing alphanumeric characters with vertical lines (bars) of
different widths. Bar code with up to 20 characters, a 2-character start symbol and
a 2-character end symbol can be read.
■ CODE39 code
A bar code representing alphanumeric characters and symbols with vertical lines
(bars) of different widths. Bar code with up to 20 characters, a 2-character start
symbol and a 2-character end symbol can be read.
■ CODE128 code
A bar code representing ASCII characters with vertical lines (bars) of different
widths.
*
To read CODE128 code, downloading i-
α
ppli compatible with the code is required ( → P241).
Read codes following instructions displayed on the screen.
◆
Scanning codes
1
m
[LifeKit]
1
After Bar code reader starts, camera automatically switches to Macro shooting
and zoom becomes ON. Hold out-camera approximately 7-10 cm away from the
code to scan.
･
During Bar code reader stand-by, the following operations are available.
u
: Zoom ON
d
: Zoom OFF
#
: Switching Macro shooting OFF/ON ( )
g
,
n
: Switching Auto focus
･
Depending on the states, the auto focus icon changes as follows.
(black) : Adjusting focus (green)/ (red) : Focus succeeded/failed
･
Switch to Macro OFF before scanning large size codes. The readability of
code may be raised by setting zoom OFF.
･
In scanning stand-by, press
m2 e 1
-
3
to adjust flicker.
Flicker adjustment → P188
2
Move out-camera over the code
The code is scanned automatically. A confirmation sound is played when
scanning is complete and the scanned data appears.
･
If scanned data exceeds 5,500 two-byte (11,000 one-byte) characters,
exceeded characters are not displayed, but they are saved.
Scanning divided QR codes
When one data item is divided into multiple (up to 16) QR codes, scan them one
by one following the instructions on the display.
･
Canceling scanning :
c e
"Yes"
Example of JAN code
Information to be scanned
"4942857315721"
Example of NW7 code
Information to be scanned
"A123456789012A"
Example of CODE39 code
Information to be scanned
" ＊ 123456ABC ＊ "
Example of QR code
Information to be scanned
" 株式会社 NTT ドコモ (NTT DOCOMO, INC.)"
Scanning state of divided QR codes*
Gray : Not yet scanned Blue : Already scanned
Green : Scanned the last
: Scanning
: On stand-by
The remaining number to be scanned/Total number*
* Displayed when scanning divided QR codes