Docomo F-08A, Manual

Page: 320 / 462

318
Network Services
Voice Mail service
If there is an incoming voice or videophone call while FOMA terminal is in a
location where radio waves are hard to reach or is powered OFF or if you do not
answer the call within the specified ring time, this service answers the caller with
a reply message and stores a voice message for you.
･
To give priority to Voice Mail service over Record message, set ring time for Voice
Mail service shorter than a response time for Record message.
･
When voice or videophone call is not answered with Voice Mail activated, it is
recorded as a missed call and
(the number indicates the number of missed
calls) appears on the stand-by display.
･
When connected to the Voice Mail service center using Chara-den, DTMF
operation is unavailable. Operate by switching to Send DTMF from submenu.
→
P57
･
When using 2in1, activation, deactivation, check setting, playing message and
setting of Voice Mail service can be set for Number A and B respectively. You can
configure settings for Number A in A mode, and for Number B in B mode, and
select one of them in Dual mode. Other items are common for both.
･
For Play messages and Voice Mail service, select either a voice or videophone call
first. Other items are common for both.
❖
Basic flow of Voice Mail service
Step 1 : Activate the service.
Step 2 : The caller leaves a voice message.
Step 3 : Play the voice message.
1
m
[Settings & NW services]
81 e
Operate by selecting a
menu item
<Voice Mail service>
[Activate] :
11 e
"Yes"
e
"Yes"
e
Enter ring time
･
When ring time is set to "0 Sec", incoming calls are not recorded in Received
calls.
･
For B Number, only Activate can be set.
[Set ring time] :
12 e
"Yes"
e
Enter ring time
･
When this is set to "0 Sec", incoming calls are not recorded in Received calls.
[Deactivate] :
13 e
"Yes"
[Check setting] :
14 e
"Yes"
･
You can change settings from the submenu.
･
For Number B, Activate/Deactivate can be checked.
[Play messages] :
15 e 1
or
2 e
"Yes"
e
Follow the voice
prompts to operate
･
indicates the number of new messages that the voice prompts presents
when they are played. This number does not include saved messages.
[Voice Mail setting] :
16 e 1
or
2 e
"Yes"
e
Follow the voice
prompts to operate
[Set V.phoneVoiceMail] :
17 e
"ON" or "OFF"
[Check messages] :
18 e
"Yes"
<Tone/Vibration message notification>
[Ring/Vibrate Msg.Alert] :
2 e
Set required items
e C
An alert sounds when a new message is recorded. The terminal vibrates
according to the setting in Call vibrate alert in Vibrate alert/effect.
･
Set Voice Mail alert to "ON" and select a notification melody.
<Notify missed call>
[Activate] :
31 e
"Yes"
e
"Yes" or "No"
If a call is received with the terminal turned OFF or out of service area, you are
notified by SMS of the call when the terminal is turned ON or moved into
service area.
･
Selecting "Yes" for receive notification from calls with Caller ID notifies you
of only incoming calls with Caller ID, and selecting "No" notifies you of all
incoming calls.
[Deactivate] :
32 e
"Yes"
[Check setting] :
33 e
"Yes"
･
You can change settings from the submenu.
<Hide Voice Mail icon>
[Hide Voice Mail icon] :
4 e
"Yes"
The voice message icon disappears from the stand-by display.