Docomo F-08A, Manual, Page: 239 / 462

237
i-
α
ppli/i-Widget
Starting i-
α
ppli automatically
◆ Setting whether to start automatically <Auto start>
You can set whether to automatically start all i-
α
ppli which are set to "ON" for User
in Set auto start info.
1
m
[i-
α
ppli]
32 e 1
or
2
◆ Setting date and time of auto start <Set auto start info.>
Set the conditions such as ON/OFF of automatic start or start time for each i-
α
ppli
and display the preset details.
･
The conditions that can be set depend on the i-
α
ppli.
･
Some i-
α
ppli may not be able to start automatically.
･
This function cannot be set when Auto start is "OFF".
1
I
(1 sec. or more)
e
Select a folder
e
Move the cursor to i-
α
ppli
e m5 e
Set required items
e C
User : Select if you perform auto start with the following conditions.
Time : Enter the time for auto start of the i-
α
ppli.
Repeat : Set the condition for repetitive auto start of the i-
α
ppli.
Weekly : Set the day of the week when Repeat is set to "Weekly".
Date : Set the date when Repeat is set to "Onetime".
Software : Set if you automatically start at the intervals preset for the i-
α
ppli.
i-
α
ppli 1-4 : For some i-
α
ppli DX, up to 4 conditions of auto start can be set while
it is running. You can set if you enable those settings.
✔
INFORMATION
･
Even with auto start set, automatic activation does not occur in the following cases,
causing
to appear on the stand-by display and to be recorded in Start failure hist.
- When the screen except the stand-by display appears
- When it is unavailable due to UIM operation restriction (except for preinstalled i-
α
ppli) or UIM
cannot be recognized.
- When the interval of auto start is too short
- When All lock, Omakase Lock, Personal data lock or Privacy mode is ON (when i-
α
ppli is
"Authorized access")
- When 2in1 is in B mode (only for Message i-
α
ppli)
- When i-
α
ppli usage is stopped by IP (Information Provider)
･
Even if you change "Repeat" to set multiple i-
α
ppli to be automatically started at the
same time, only one of them can be activated at one time. The information of the i-
α
ppli
that failed to be activated is recorded in Start failure hist., however, does not appear
on the stand-by display.
◆ Displaying the start failure history
When auto start of the i-
α
ppli fails, appears on the stand-by display and the
name of the i-
α
ppli, date and time, and causes are recorded.
･
Up to 20 items can be recorded. When exceeding the limit, record is overwritten
chronologically.
･
When displaying Start failure hist. or when the next auto start is successful, on
the stand-by display disappears.
1
m
[i-
α
ppli]
41
･
To delete histories, press
C
and select "Yes".
Using i-
α
ppli call
This is a function to ask activation of i-
α
ppli from a third party in order to call the
opponent when playing a versus game connecting to a network.
･
You can use this function with i-
α
ppli call compatible i-
α
ppli.
･
You can reject reception of i-
α
ppli call collectively. For details, refer to "Mobile
Phone Use's Guide [i-mode] FOMA version".
◆
Sending i-
α
ppli call for calling
1
Operate i-
α
ppli and select "Yes" on a confirmation screen for
sending i-
α
ppli call.