Docomo F-08A, Manual

Page: 147 / 462

145
Mail
Using message services
Receive MessageR/F
When MessageR/F is received
1
Receive MessageR/F
and (blue) or (green) blink and "Receiving messages
…
" appears.
MessageR/F ring alert sounds, the light turns on or blinks, and the reception
result screen appears.
The received MessageR is saved in "MessageR" folder. The received MessageF
is saved in "MessageF" folder.
･
g
: Cancel receiving
May be received depending on the reception conditions.
a
Icon
(blue) : Unread MessageR exist (green) : Unread MessageF exist
b
Reception result ticker
c
The number of received MessageR/F
･
The contents of unread MessageR/F are displayed after the reception result
screen appears, and if you do not press any key for about 15 seconds, the
previous screen reappears.
When reception has failed
"
×
" appears on the right side of "Message R" or "Message F" on the reception
result screen. To receive again, perform Check new message.
✔
INFORMATION
･
When multiple mail and/or MessageR/F are received at the same time, the terminal
operates depending on the conditions set for the mail or MessageR/F received last.
･
When MessageR/F is received, the MessageR/F in the i-mode Center is deleted.
･
In the following cases, received MessageR/F is stored in the i-mode Center.
- When the power is OFF or out of i-mode service area
- During a videophone call
- Accessing Data Center
- In Omakase Lock or Self mode
- During FirstPass center connection
- When reception has failed
- When receiving SMS
- Infrared communication/iC transmission
- When the memory space is filled with MessageR/F unread or protected
･
When the memory space is not enough or when exceeding the savable number, a new
MessageR/F overwrites the chronologically oldest message except for unprotected
unread messages.
･
If there is not enough memory space available because the memory space is filled with
unread and protected MessageR/F, reception of MessageR/F is stopped,
(red) or
(red) appears on the screen. To receive, displaying the contents of unread MessageR/
F, deleting unnecessary MessageR/F or unprotecting is required.
･
If there are remaining MessageR/F in the i-mode Center, or appears. It may
not appear even when there are MessageR/F. When the i-mode Center reaches the
maximum number of mail items that can be stored, the icon changes to
or .
◆ Displaying new MessageR/F
1
On the reception result screen,
2
or
3
･
Press
1
to display i-mode mail.
2
Select MessageR/F
Playing when a melody is attached → P144
Displaying MessageR/F → P146
Blinking
Blinking
Receiving screen Reception result screen
a
b
c