Docomo F-08A, Manual

Page: 458 / 462

37
■ Communication protocol result code
■
Display example of result code
When ATX0 is set
Regardless of the settings of AT
￥
V command, only "CONNECT" is displayed upon completion of
connection.
Text display example
: ATD ＊ 99 ＊＊＊ 3#
CONNECT
Number display example : ATD
＊
99
＊＊＊
3#
1
When ATX1 is set
･
When ATX1, AT ￥ V0 (default) is set
Upon completion of connection, the result code is displayed in the following format : "CONNECT
<speed between FOMA terminal - PC>".
Text display example
: ATD ＊ 99 ＊＊＊ 3#
CONNECT 460800
Number display example : ATD
＊
99
＊＊＊
3#
1 21
･
When ATX1, AT ￥ V1 is set
*1
The code is displayed upon completion of connection in the following format.
"CONNECT<speed between FOMA terminal - PC> <Communication protocol> <dialup connection
(APN)>/<upstream maximum speed (between FOMA terminal
→ radio base station)>/<downstream
maximum speed (between FOMA terminal ← radio base station)>"
*2
Text display example : ATD
＊
99
＊＊＊
3#
CONNECT 460800 PACKET mopera.net/384/7232
(Indicates the terminal is connected to mopera.net providing a maximum
upload speed of 384kbps and a maximum download speed of 7232kbps.)
Number display example : ATD
＊
99
＊＊＊
3#
1 21 5
*1 When ATX1 and AT ￥ V1 are set at the same time, it is likely that dialup connection will fail. It is recommended
that only AT
￥
V0 be used.
*2 When AT
￥
V1 is set, <dialup connection (APN)> and the following are displayed only when packet is used for
connection.
No. Text display Meaning
1 PPPoverUD Connect via 64K data communication (BC=UDI, +CBST=116,1,0)
3 AV64K Connect via 64K videophone
5 PACKET Connect via packet communication