Docomo F-08A, Manual

Page: 84 / 462

82
Sound/Screen/Light Settings
◆
Shutter sound for still image/moving picture
Set a shutter sound for still image shooting and moving picture shooting (recording
with Sound recorder).
･
This setting also applies to Shutter sound of Recording settings and Image
settings.
1
m
[Settings & NW services]
115 e 3
or
4 e 1
-
5
Charge alert
Setting confirmation tone for charging
You can set if you activate the battery charging sound at the start and end of
charging.
1
m
[Settings & NW services]
116 e 1
or
2
✔
INFORMATION
･
Even when "ON" is set, the charge alert does not sound during a call or communication,
in Silent mode or Public mode (Drive mode).
On-hold tone
Setting on hold tone
1
m
[Settings & NW services]
1172 e 1
-
3
Quality alarm
Sounding alarm when a line is likely to be
disconnected
･
The call may be interrupted without sounding the alarm depending on the call
conditions or radio wave conditions.
1
m
[Settings & NW services]
1173 e 1
-
3
･
You can set it during a voice call by pressing
m5
.
Reconnect alarm
Setting alarm for reconnecting interrupted call
･
While the call is interrupted, the other party hears no sound.
･
The time required for reconnection differs depending on the call conditions or
radio wave conditions. It normally takes 10 seconds at most.
･
You are charged for the time used for reconnection (up to 10 seconds).
･
The call may be interrupted without sounding the alarm depending on the call
conditions or radio wave conditions.
1
m
[Settings & NW services]
1174 e 1
-
3
･
You can set it during a voice call by pressing
m4
.
Low Battery alert
Informing you by alarm that the battery is
almost exhausted
･
Regardless of this setting, an alarm sounds from the earpiece when the battery is
almost exhausted during a call.
1
m
[Settings & NW services]
1175 e 1
or
2
Silent mode
Muting ring tone from the FOMA terminal
You can set FOMA terminal not to emit a sound by enabling the vibrator for
incoming calls or muting the keypad sound.