Self-Test Error Messages,
Continued
The option test results are option dependent. TURBOchannel
options can display the tests differently. Some options show only
the <tstnam> strings. Also, some options do not have a HELP
feature, therefor the T TC0 /? command does not display (it could
even cause an error to be reported by some options).
NOTE
Read the specific
TURBOchannel Option User’s Guide
to properly test the option.
Running an
Option Test
Enter the following to run an option test.
Syntax:
T TC0 / [TSTNAM]
Example:
>> T TC0/SRAM
>>
The DEFZA STATIC RAM is now tested. The SRAM option is
listed in the TURBOchannel option test display.
NOTE
If some devices have qualifiers to a particular subtest,
you can add these onto the end of the command line
as outlined in the option’s firmware specification or
user’s guide.
Executing a
Script
Enter the following to execute a script.
Syntax:
T TC0 SCRIPT [SCRIPTNAM]
Continued on next page
A–61