Self-Test Error Messages,
Continued
The suberror codes reported by the DZ self-test are as follows:
Table A–4 DZ Suberror codes
Suberror
(hexadecimal)
Meaning
21
READ LPR Baud rate is incorrectly set
22
READ LPR Character width is incorrectly set
23
READ LPR Parity bit is incorrectly set
24
READ LPR Receiver on bit is incorrectly set
31
DZ Modem test - Failed RTS <-> CTS
loopback
32
DZ Modem test - Failed DSRS <-> DSR & CD
loopback
33
DZ Modem test - Failed LLBK <-> SPDMI
loopback
34
DZ Modem test - Failed DTR <-> RI loopback
41
DZ Polled test - transfer has timed out
42
DZ Polled test - data is not valid
43
DZ Polled test - Parity Error
44
DZ Polled test - Framing Error
45
DZ Polled test - Overrun Error
46
DZ Polled test - Character received !=
Character transmitted
51
DZ Interrupt test - transfer has timed out
52
DZ Interrupt test - data is not valid
53
DZ Interrupt test - Parity Error
54
DZ Interrupt test - Framing Error
55
DZ Interrupt test - Overrun Error
Continued on next page
A–11
