Displaying System Configuration,
Continued
Column
Meaning
ADDR
If the device is an Ethernet device, the ADDR
column shows the Ethernet address. If the
device is a system device, the first character
shown is the bus (A or B); the second
character represents the device number (3,
5, 6); the third field (00) is not used.
DEVTYPE
Device type, RODISK is a read-only disk
(CDROM).
NUMBYTES
Drive capacity. Capacity is not displayed for
empty removable media drives.
RM/FX
Indicates whether the drive has removable or
fixed media.
WP
Indicates whether the drive is write protected.
DEVNAM
Device name for the drive.
REV
Firmware revision level for the drive.
To display TURBOchannel option configurations, you must use
the TURBOchannel utility T/UT TCA.
SHOW CONFIG
The SHOW CONFIG command determines the presence of storage
devices, the system type and firmware revision, the Ethernet
hardware address, and the quantity of memory in the system.
Syntax:
>>> SHOW CONFIG
Return
The system displays a configuration table similar to the one
shown next.
Continued on next page
5–9
