Digital Equipment VAXstation 4000 90 Service Information Download Page 103

Page: 103 / 432

System Console Commands,

Continued

Response

Meaning

VMS/VMB

The VMS device name, and console boot name for
the device.

ADDR

Ethernet hardware address or SCSI device ID. The
SCSI device ID has the format:

A/DEVICE_ID/LOGICAL_ID

The LOGICAL ID is always 0.

DEVTYPE

Device type, RODISK is a read-only disk (CDROM).

NUMBYTES

Drive capacity. Capacity is not displayed for empty
removable media drives.

RM/FX

Indicates whether the drive has removable or fixed
media.

Indicates whether the drive is write protected.

DEVNAM

Device name for the drive.

REV

Firmware revision level for the drive.

Continued on next page

4–9

Summary of Contents for VAXstation 4000 90

















































































































































































































































































































































































































































Search results

Summary of Contents for VAXstation 4000 90

Reviews:

Related manuals for VAXstation 4000 90

Brands by name

Popular brands

Digital Equipment VAXstation 4000 90, Service Information

Search results

Summary of Contents for VAXstation 4000 90

Reviews:

Related manuals for VAXstation 4000 90

Brands by name

Popular brands