Device Tests,
Continued
Running
Self-Tests
This section describes the test command interface used to run
the self-test on a device. Table 5–4 lists the device IDs and
mnemonics.
Device Test
Syntax Rules
Table 5–5 describes the syntax used to run device self-tests.
Table 5–5 Device Test Syntax Rules
If you want to...
Then...
Example
Test one device
Type T and only one
device number
T 2
Test a range of
devices
Type T and the
device numbers
being tested,
separated by a
colon (:)
T 8:10
Separate individual
tests or ranges of
devices
Use a comma or a
space
T 6,5
Run a self-
test sequence
continuously
Use the console
REPEAT command.
The REPEAT
command executes
a command
continuously until
you press
Ctrl C
at
the console or until
an error occurs.
>>> REPEAT T 1:4
Continued on next page
5–16
