System Test Monitor,
Continued
When a device fails, the device status line in the response becomes
the error message. You can get extended error information using
the SHOW ERROR command. Interpretation of the error code is
explained in Appendix A.
System Test
Summary
Screens
You can get summary information about the most recent system
test using either of the following two methods:
Action
Result
Press
Ctrl C
.
Stops the system test and displays
summary screens for the devices.
The system prompts for each
summary screen. It can take a
few moments after you press
Ctrl
C
to view the summary screens.
This time is needed to clean up the
interrupted system test.
Type
>>> SHOW ESTAT
at the
console prompt.
Displays the summary from the
most recent system test since power
up. The system prompts for each
summary screen.
Continued on next page
5–35
