Using MOP Ethernet Functions,
Continued
***system 2***
$ MCR NCP
NCP>SET MODULE CONFIGURATOR CIRCUIT ISA-0 SURVEILLANCE ENABLED
NCP>SHOW MODULE CONFIGURATOR KNOWN CIRCUITS STATUS TO ETHER.LIS
NCP>EXIT
$ TYPE ETHER.LIS
Circuit name
= ISA-0
Surveillance flag
= enabled
Elapsed time
= 00:09:37
Physical address
= 08-00-2B-28-18-2C
Time of last report
= 27-Feb 11:50:34
Maintenance version
= V4.0.0
Function list
= Loop, Multi-block loader, Boot, Data link
counters
Hardware address
= 08-00-2B-28-18-2C
Device type
= ISA
Depending on your network, the file used to receive the output
from the SHOW MODULE CONFIGURATOR command may
contain many entries, most of which do not apply to the system
you are testing. It is helpful to use an editor to search the file
for the Ethernet hardware address of the system under test.
Existence of the hardware address verifies that you are able to
receive the address from the system under test.
5–87
