Self-Test Error Messages,
Continued
The FRU reported by all error formats is either 1 for the system
board FRU, or (100 + device_id*10 + logical unit number.
Table A–16 lists the information values reported by some
extended SCSI self-test errors. Hexadecimal values are used
for self-test.
Table A–16 SCSI Information Values
Information
Decimal
Hexadecimal Meaning
1
1
Valid group code bit clear in
Controller status register
2
2
Valid group code bit set in Controller
status register
3
3
Terminal count bit clear in Controller
status register
4
4
Terminal count bit set in Controller
status register
5
5
Parity error bit clear in Controller
status register
6
6
Parity error bit set in Controller
status register
7
7
Gross error bit clear in Controller
status register
8
8
Gross error bit set in Controller status
register
9
9
Interrupt bit clear in Controller status
register
10
A
Interrupt bit set in Controller status
register
11
B
Selected bit clear in Controller
Interrupt register
Continued on next page
A–39
