DEUTZ-FAHR FL35-70HP Series, Operation Manual

Page: 359 / 417

Delivery Acceptance and Transportation
358
11.1.Delivery and Acceptance
When the user buys the tractor, the user should conduct acceptance of the machine purchased, and conduct
inspection with respect to following aspects:
1. Inspect whether documents supplied with the machine are complete
The documents supplied with the machine include: instructions for operation of tractor, product certificate, three-
guarantee (for repair, replacement and compensation of faulty products) service card, packing list for articles
supplied with the machine and "technical document of engine supplied with the machine" (from the engine
manufacturer), and tractor parts drawings. Check corresponding numbers on the product certificate, three-guarantee
service card and "technical document of engine supplied with the machine" are consistent with that indicated on the
machine.
2. Inspect whether the articles supplied with the machine are complete
Check the articles supplied with the machine as per the packing list for articles supplied with the machine. The
articles supplied with the machine include spare parts and tools supplied with the machine. The articles supplied
with the machine base on the requirements specified in the "Technical Document of Engine" (in case of any question,
contact the dealer).
3. Inspect whether the machine is in good condition.
After the machine is transported, its technical conditions may vary, so the user may further confirm condition of the
machine during purchase.
11.2.Transportation
During transfer of the tractor, it is required to strictly follow traffic rules if the tractor is driven and a distance of at
least 60m between the tractor and another vehicle should be kept to avoid collision arising out of any accident;
If the tractor is loaded onto a trailer for transportation, following points should be met:
1. When loading/unloading the tractor, a flat place should be selected.
2. The tractor should be loaded/unloaded with the help of a special loading/unloading platform.
3. An assistant must be designated to provide guidance in the site, so that no unauthorized personnel approaches
the site.
4. After loading, put the hitch lever to the lowest position, apply the hand brake, engage the reverse gear,
remove the key, lock the door, and turn off the main power supply switch.