DEUTZ-FAHR FL35-70HP Series, Operation Manual, Page: 226 / 417

Electrical system
225
Steps for replacing bulb are as below:
●
Carefully clean the outside of the light unit to avoid the
risk of dirt getting on the reflector during bulb
replacement;
●
Using a screwdriver, loosen the screw
②
from the
protective cover
①
to access the bulb
③
;
●
Gently rotate the bulb
③
, to remove it out of the
reflector glass;
●
Install new bulb
●
Refit the protective cover
①
. Fix it suing screws.
Fig. 6-26
Fig. 6-27
Important:
Avoid touching the inner surface of the reflector. Make sure no foreign material gets inside the
reflector.
6.4.2.Door-controlled interior illuminating light
The tractor is equipped with the following door-controlled interior illuminating light:
●
Interior illuminating light