DEUTZ-FAHR FL35-70HP Series, Operation Manual, Page: 195 / 417

Electrical system
194
Maximum inflation pressure of an ordinary tire shall not exceed the value marked on the tire.
Important:
If a tractor is equipped with such type of tires, check the pressure compulsorily and often have the
pressure kept identical to that as indicated in the maintenance table.
5.1.2.Wheel puncture
This kind of tractors will be equipped with two different types of tires:
●
Radial tires (with the letter "R" marked for reference). This kind of tires has no inner tubes (with "Tubeless"
marked for reference);
●
Conventional tires all have inner tubes;
If any tire becomes flat, stop the tractor immediately and if you are driving on a city road, please stop your tractor
at a roadside parking lot as soon as possible before troubleshooting.
Danger:
Please do not drive when any tire has become flat. Otherwise, irreparable damages may happen and your
tractor may be out of control.
Only training tire experts can decide whether a tire should be repaired or replaced.
Important:
The tire repair can only be performed by qualified workshop professionals.
It should be ensured that all necessary tools have been well prepared before any tire is removed. Carry out safe
operations according to the following instructions:
●
Park your tractor on a solid ground where there is no vehicle driving, lock the wheels and apply the parking
brake.
●
Put a jack under the tractor and insert a block of solid wood between the tractor and the ground.
●
Use the jack to lift the tractor high enough to ease the load during wheel removal, unscrew the studs completely
and then remove the wheels.